Non-Reinforced PPS Injection Grade Color Masterbatch
Unfilled PPS injection molding grade for thin-wall connectors and precision components.
Our non-reinforced PPS injection grade color masterbatch is designed for unfilled PPS injection molding. It provides good colorability and excellent surface finish for thin-wall electronic connectors and precision components.
Product Features
- Good colorability in unfilled PPS
- Excellent surface finish
- Thin-wall capability
- Inherent flame retardancy
- Precision molding
Typical Applications
Typical Physical Properties
The following data represents typical values for this specific grade. Values may vary slightly depending on color and pigment loading. All tests performed according to referenced ISO/ASTM standards.
Physical Properties
| Property | Test Method | Value |
|---|---|---|
| Carrier Resin | — | Unfilled PPS |
| Pigment Loading | — | 15-30% |
| Melt Index (315°C/5 kg) | ISO 1133 | 30-80 g/10 min |
| Density | ISO 1183 | 1.3-1.7 g/cm³ |
| Moisture Content | ISO 15512 | < 0.03% |
Processing Conditions
| Parameter | Value |
|---|---|
| Drying | 130-150°C, 3-4 hours |
| Processing Temperature | 300-330°C |
| Addition Ratio | 2-4% |
| Mold Temperature | 130-150°C |
Color Performance
| Property | Test Method | Value |
|---|---|---|
| Delta E (CIE Lab) | ISO 7724 | < 1.0 |
| Surface Gloss | ISO 2813 | > 90 GU |
| Heat Stability | Internal | 5 min @ 330°C |
Disclaimer: The information and technical data provided herein are typical values and are not intended to be used as specifications. Testing is recommended under your own specific processing conditions to confirm suitability. For food-contact or medical applications, please contact us for grade-specific compliance documentation (FDA, EU 10/2011, USP Class VI, ISO 10993).
Other PPS Grades
Explore our complete range of pps polyphenylene sulfide color masterbatch solutions. Each grade is optimized for specific applications and processing requirements.
